Canada’s hopes of restoring tariff-free trade with the United States are running into an uncomfortable reality. Even if Ottawa reaches a new agreement with President Donald Trump’s administration, some of the tariffs affecting Canadian steel, automobiles, aluminum and other major industries are likely to remain.
Canada-U.S. Trade Minister Dominic LeBlanc acknowledged that possibility on November 19, 2026, as negotiations continued over an interim agreement intended to ease economic pressure on Canadian businesses.
His warning signals a shift in expectations. Rather than promising the complete elimination of American tariffs, Ottawa is increasingly focused on securing conditions that allow Canadian industries to survive and remain competitive.
For manufacturers, workers and communities dependent on cross-border trade, the difference could determine where future investments and jobs end up.
LeBlanc Signals a More Realistic Approach to Trump’s Tariffs
Canada’s minister responsible for U.S. trade delivered an unusually candid assessment of the country’s negotiating position after meeting with the federal Advisory Committee on Canada-U.S. Economic Relations on November 19. LeBlanc acknowledged that even a successful agreement with Washington would probably leave some American tariffs in place. The comments represented an important clarification of what Ottawa considers achievable as the Trump administration continues to use trade restrictions to advance its economic priorities.
Speaking to CBC’s Power & Politics, LeBlanc explained that Canada must secure more favourable conditions than competing countries while recognizing that some sector-specific tariffs are likely to survive. His central concern was ensuring the long-term economic viability of Canadian industries. That approach does not mean Ottawa has abandoned its opposition to the duties. Instead, it reflects the difficult choices facing negotiators when the United States remains unwilling to restore completely unrestricted access.
The distinction matters because a reduced tariff can still represent a substantial financial burden. A manufacturer paying a 15% duty instead of 25% would benefit from meaningful savings, but the remaining charge could continue to influence pricing, customer relationships and investment decisions. For businesses operating on narrow profit margins, an agreement that looks successful politically may still leave considerable economic challenges unresolved.
Ottawa Is Pursuing an Interim Agreement Rather Than a Complete Trade Reset
The Canadian government’s immediate objective is an interim arrangement that provides relief from two different categories of American tariffs. The first involves Section 232 of U.S. trade law, which allows Washington to restrict imports on national security grounds. These measures affect strategically important sectors, including steel, aluminum, automobiles and lumber. The second involves Section 338 tariffs, which the Trump administration imposed on selected Canadian products after negotiations deteriorated in August.
LeBlanc has indicated that Ottawa wants the Section 338 duties eliminated entirely while seeking lower rates on the sector-specific tariffs. That difference is important because the government is not approaching every trade restriction with the same expectations. Certain measures may be more difficult to remove because Washington regards them as part of its broader industrial and national security strategy.
Canadian officials have discussed reaching an interim agreement before the end of 2026, although LeBlanc has emphasized that the timing is not a firm deadline. Securing an acceptable arrangement in January or February would be preferable to rushing into an unfavourable agreement simply to satisfy a calendar target. The immediate objective is to relieve pressure on businesses while creating an opportunity for more comprehensive negotiations over North America’s long-term trading relationship.
Steel and Aluminum Tariffs Remain Major Obstacles
Canada’s steel industry faces particularly difficult circumstances because American tariffs affect a market that has historically absorbed most of its exports. The United States has imposed duties of 50% on many primary steel and aluminum products, while certain derivative products face different rates. These restrictions have forced Canadian producers to reconsider pricing, production and customer relationships. Ottawa’s own figures show that Canadian steelmakers exported more than half their production in 2024, with over 90% of those exports going to the United States.
The consequences extend beyond the mills themselves. Steel production supports transportation companies, construction suppliers, equipment manufacturers and numerous businesses that depend on industrial activity. Statistics Canada estimated that American demand accounted for 67% of payroll jobs in Canada’s iron and steel mills and ferro-alloy manufacturing industry in 2024. Losing access to that market would therefore carry consequences across entire communities.
Reducing tariffs from 50% to 25%, as contemplated during earlier negotiations, would provide meaningful relief. However, a remaining 25% duty could still make Canadian steel less attractive to American customers when alternative suppliers or domestic producers are available.
Canada’s Automotive Industry Faces an Even Bigger Threat
The automotive sector represents another major challenge because Canadian vehicle manufacturing is deeply connected to American production and consumer demand. Federal government figures indicate that more than 90% of Canadian-made vehicles and 60% of Canadian-made automotive parts are exported to the United States. The industry supports more than 500,000 jobs across its broader economic network, including approximately 125,000 direct manufacturing positions, making American market access particularly important.
Canadian-made vehicles have faced a 25% U.S. tariff on their non-American content since April 2025, with special treatment for qualifying vehicles under the Canada-United States-Mexico Agreement. The uncertainty intensified in August 2026 when Trump threatened to raise tariffs on Canadian automobiles, trucks and automotive parts to 50% beginning January 1, 2027. That threatened increase has become another source of pressure in negotiations.
For Canadian manufacturers, the difference between a 15%, 25% or 50% tariff is substantial. Automakers make investment decisions years before vehicles reach showrooms, and unpredictable trade costs complicate decisions about where to build new models. Canadian factories must compete not only with plants overseas but also with American facilities owned by the same multinational companies. An agreement that lowers duties without removing them could improve Canada’s position while leaving difficult competitive disadvantages in place.
North America’s Integrated Supply Chains Make Tariffs Especially Costly
The automotive and steel industries demonstrate why tariffs between Canada and the United States can create consequences far beyond the border. Vehicles assembled in North America frequently contain components manufactured in different countries, while steel and aluminum move through suppliers before becoming finished products. Statistics Canada reported that Canadian manufacturers shipped approximately $324 billion in goods to the United States in 2024, with more than one-quarter of that value reflecting American-made inputs embedded in Canadian manufacturing exports.
This interconnected system means that restrictions affecting Canadian exports can also create difficulties for American companies. A Canadian automotive supplier facing higher tariffs may need to increase prices or reduce production, potentially raising costs for customers operating assembly plants in the United States. The effects can spread through purchasing decisions, delivery schedules and investment plans.
Statistics Canada’s research illustrates the scale of this dependence. In 2024, American demand accounted for approximately 76.4% of payroll jobs in Canada’s automobile and light-duty motor vehicle manufacturing industry. That exposure helps explain why manufacturers are seeking predictable trading conditions rather than short-term political assurances. Even if tariffs are reduced, uncertainty over future increases can discourage investment in factories and equipment that require years to generate returns.
The Future of CUSMA Adds Another Layer of Uncertainty
The Canada-United States-Mexico Agreement remains central to Ottawa’s trade strategy, but its future has become increasingly complicated. The agreement took effect on July 1, 2020, replacing the original North American Free Trade Agreement. Under its provisions, the three countries conducted their first scheduled joint review on July 1, 2026. During that process, the Trump administration declined to renew the existing agreement on its current terms, although Canada and Mexico supported an extension.
Importantly, Washington’s refusal to renew the agreement did not immediately terminate it. CUSMA remains in force, with provisions for annual reviews until the countries agree to extend it or its existing term expires in 2036, unless a country formally withdraws earlier. This creates a prolonged period in which companies must assess the possibility of future rule changes.
LeBlanc has suggested that securing an interim tariff agreement could help advance more substantial negotiations within the CUSMA review process. Such discussions would provide opportunities to address unresolved trade restrictions and establish more predictable conditions for businesses. However, the existence of the agreement does not automatically prevent Washington from imposing separate sectoral tariffs under American law. That distinction explains why Ottawa is treating immediate tariff relief and the broader future of North American trade as related but separate negotiating objectives.
Negotiations Have Resumed, but Major Disagreements Remain
Canada and the United States have experienced several difficult rounds of trade discussions throughout 2026. Negotiations collapsed in August after the two governments failed to resolve important disagreements over tariff relief, particularly concerning vehicles and heavy-duty trucks. According to Reuters, an earlier proposal would have reduced the main U.S. tariff on Canadian cars and light-duty trucks from 25% to 15%, while cutting steel and aluminum duties from 50% to 25%. The proposal was never finalized.
Contacts resumed in the autumn, with LeBlanc communicating regularly with U.S. Commerce Secretary Howard Lutnick and U.S. Trade Representative Jamieson Greer. Canada’s chief trade negotiator, Janice Charette, has also been involved. However, reports following the November 19 advisory committee meeting indicated that significant disagreements remained, particularly over automotive tariffs.
The competing accounts of progress illustrate the difficulty of the situation. LeBlanc has acknowledged that some progress has been made, while Reuters reported that people familiar with the private briefing believed Washington had offered little meaningful movement on Canada’s most important demands. A workable agreement would require both governments to accept terms that serve their political and economic interests. Until that happens, regular communication should not be confused with an imminent breakthrough.
Changes in Washington Do Not Guarantee Immediate Tariff Relief
The American political landscape shifted following the November 3, 2026, midterm elections, when Democrats won control of both chambers of Congress. The results raised questions about whether lawmakers might challenge Trump’s tariff policies once the new Congress takes office in January 2027. Nevertheless, Canadian officials have cautioned against assuming that a different congressional majority will automatically restore tariff-free trade.
One major complication involves the legal authority behind the restrictions. Section 232 of the Trade Expansion Act of 1962 gives the American president considerable power to impose import restrictions when national security concerns have been identified through the prescribed process. Congress can seek to change or limit that authority, but doing so requires legislation and overcoming political obstacles. The president’s position therefore remains important even when congressional control changes.
Democratic Senator Chris Coons has encouraged Canada to pursue an interim agreement with the Trump administration rather than delay negotiations until Congress changes hands. He has also acknowledged that some Democrats representing steel-producing states may support retaining protective tariffs. That reality demonstrates how American trade politics cross traditional party divisions. Canadian negotiators may find sympathetic voices in Washington without necessarily finding enough support to eliminate the restrictions completely.
Canadian Businesses and Workers Are Already Feeling the Pressure
The economic effects of trade uncertainty are no longer hypothetical. Statistics Canada’s first-quarter 2026 Canadian Survey on Business Conditions found that 50.6% of manufacturing businesses reported being negatively affected by American tariffs during the previous year. The agency also reported that Canadian manufacturing employment declined by nearly 36,000 positions between December 2024 and December 2025. Employment in motor vehicle parts manufacturing fell 9.3%, while employment in iron and steel mills and ferro-alloy manufacturing declined 8.7%. Those figures reflect broader industrial conditions and should not be attributed entirely to tariffs.
Recent developments in the steel industry provide a more personal illustration of the pressures facing workers. On November 13, Stelco announced plans to recall 175 temporarily laid-off employees at its Hamilton, Ontario, operations beginning December 1, after securing sufficient customer commitments to restart finishing activities. The announcement offered encouraging news for affected households, although it did not eliminate the industry’s wider challenges.
For manufacturing communities, decisions made in Washington can influence far more than export figures. A cancelled production shift can affect household spending, while a postponed factory investment can reduce opportunities for apprentices and younger workers. That is why tariff negotiations have become closely connected to concerns about job security and the long-term future of Canadian manufacturing.
Ottawa Is Preparing Support Measures Beyond Trade Negotiations
Canada has also been developing domestic measures to protect industries that remain vulnerable to American trade restrictions. In October 2026, the federal and Ontario governments announced an $8.7-billion action plan covering strategic industries, including steel, automotive manufacturing and critical minerals. The measures include support for industrial investment, domestic purchasing initiatives and efforts to strengthen the competitiveness of Canadian producers.
The federal government has separately expanded financial assistance, tariff relief and employment supports for affected businesses and workers. These initiatives are intended to help manufacturers manage immediate financial pressures while encouraging investment in Canadian production. Ottawa has also introduced policies designed to support businesses seeking new customers and reduce dependence on a single export market.
Such measures cannot fully replace access to American customers. Building new export relationships requires time, particularly in industries where factories, transportation networks and suppliers have been developed around North American production. Nevertheless, greater domestic investment and market diversification could improve Canada’s negotiating position by reducing its exposure to future trade disruptions.
The challenge is balancing immediate economic protection with longer-term competitiveness. Government support may help manufacturers preserve jobs and modernize equipment, but sustained industrial growth ultimately depends on reliable demand, competitive costs and confidence that businesses can sell their products profitably.
The Real Test Will Be Whether Canadian Industries Can Remain Competitive
LeBlanc’s warning ultimately changes how Canadians may need to evaluate any future trade agreement with the Trump administration. A deal that reduces tariffs could represent genuine progress even if it falls short of the unrestricted market access Canadian businesses previously enjoyed. However, the size of the remaining duties, their application to individual products and Canada’s treatment compared with competing trading partners will determine how valuable that agreement actually becomes.
For steel producers, automotive manufacturers and other export-dependent industries, predictability may be nearly as important as the headline tariff rate. Businesses need to understand the costs they will face before committing to new facilities, equipment or employment. If an agreement provides lower rates but leaves companies exposed to sudden increases, its economic benefits could be limited.
Canada therefore faces a difficult negotiating calculation. Holding out for complete tariff elimination might produce better terms, but it could also prolong uncertainty and expose businesses to further restrictions. Accepting limited relief could protect jobs sooner while leaving important disputes unresolved.
LeBlanc’s message suggests Ottawa is preparing Canadians for a compromise rather than a complete victory. The government’s challenge is ensuring that any compromise does more than produce an announcement. It must provide sufficiently stable and competitive conditions for Canadian industries to continue investing, producing and employing workers over the long term.